What to Know About Lighting Installation

Desert Sand Ave Riverside, CA, US, 92505


Dash Electric is proud and happy to share the completion of a lighting installation project for a client in Riverside, CA. The project consisted of installing eight LED lights throughout the home, including one fixture in the kitchen and the hallway. The client was looking for a way to improve their home’s appearance while also saving energy and money. We were able to meet both of those objectives with this project!

This lighting installation also included installing living room light fixtures throughout the space, as well as replacing existing lights with energy-efficient models that were more durable and cost-effective. The result was an updated space that looks fresh and modern while still maintaining its original character. It was completed on time and within budget with no issues encountered during installation. The client was extremely pleased with the results of this project and will continue to use our service for future lighting installations.

Process of indoor lighting installation

This guide will show you how to install an in-wall LED lighting system. It covers the steps of inspecting the area, deciding where to place the lights, calculating power consumption, choosing LEDs based on their efficiency and cost of operation, and installing them into your ceilings.

Inspect the area to be lit

The first step in installing lighting is to inspect your surroundings, looking for possible obstructions and glare sources that could affect your work. For example, if you’re installing lights in a small room with no windows and an uneven ceiling, you should make sure that there are no trip hazards, such as things like furniture or objects that might get in the way of your work. 

You should also check conditions such as humidity levels and temperature fluctuations inside the room; these two factors can cause problems with electrical systems when they change suddenly during installation. Finally, you should check all wiring throughout the building so that nothing gets stuck on or tangled up during installation, and remember not to forget about plumbing.

Decide where the lights will go

The next step is to decide where the lights will go. You should consider the amount of light needed for each area, as well as what type of lighting is needed. For example, if you have a large room with lots of furniture, you might want to use track lights instead of wall sconces or recessed fixtures because they provide more even coverage than those other types.

Light the room and measure the illumination

The next step is to measure the illumination in your room. This can be done with a light meter, which is a tool that measures how much light falls on an object or surface. To use it, you’ll need to set up some basic equipment:

  • A lamp that illuminates your space (a desk lamp works well)
  • A white piece of paper or card stock such as printer paper
  • An overhead projector and screen

Calculate the power consumption required

Calculate the power consumption of the lights. This can be done by looking at their wattage and comparing it with your lighting fixture’s capacity, as well as considering their hours of operation and length of time in use per day. For example, if you have 10 lights that are each rated at 100 watts, this means you will need roughly 100 watts per hour of operation for them altogether and that’s just one fixture.

Choose lights based on their efficiency and cost of operation

Choosing the right lighting for your space is a crucial step in the process. You need to choose lights based on their efficiency, cost of operation, and other factors. Efficiency is measured in lumens per watt (LPW), which refers to how much light is produced by each watt of electricity used by your equipment. The more efficient your bulbs are at turning electricity into usable light, the lower their total energy consumption will be during operation and therefore cheaper. Once you’re done with the steps above, you can now start installing your light fixtures.

Benefits of having a dependable electrician lighting service

Looking for an electrician? You may be surprised at what a qualified professional lighting electrician can do. You can use their expertise to avoid overpaying for DIY services that don’t provide the level of knowledge needed to solve your problem. Let’s look at some of the benefits of having a dependable lighting service provider in your home or business:

Lighting service providers are more affordable than DIY

You can’t do it yourself. You don’t have the tools or expertise, and you would be spending more time trying to figure out how to do it than actually getting the job done. You will save money in the long run by hiring an electrician lighting service provider that offers affordable rates for their services.

They have experience solving lighting problems

The best electricians also have experience solving lighting problems. They’ve seen dozens of different situations and know what to look for in every case. They can tell you how to fix things, troubleshoot, and make sure that your home or business is safe from fire hazards. Expert electricians can also help you with proper lighting installations.

Their services include efficiency upgrades

Energy-efficient lighting can help you save money on your electricity bill. If you’re looking for an easy way to save some cash, then consider installing energy-efficient lighting. There are many different types of energy-efficient lights and they come in all shapes and sizes from small bulbs that fit inside your existing fixture to large bulbs that can be installed outside or above your ceiling light fixtures. Whatever type of light you choose will reduce the amount of electricity used by your home or business by almost half!

They’re professionally licensed and insured

Professional electricians are licensed and insured. They have the right tools to do the job, and they’re trained in safety so you can rest easy knowing your home or business is in good hands.

If you have any electrical problems, it’s best to call a professional electrician. You don’t need to do it yourself and you can trust them to do the job right. A professional lighting electrician will know how to fix your home’s lighting system so that it works properly and safely, which means that when they’re finished they will have ensured that there isn’t any damage done or potential hazards present in the area surrounding where their work was performed.

Call a pro for your lighting installation project

If you’re looking for help with lighting installations or any other electrical repair service in your home or business, then our 24/7 electrician in Riverside CA is just who you are looking for. Here at Dash Electric, our electricians are certified, insured, and bonded. Just let our team know what needs to be done, and we’ll handle the rest.

We also offer ceiling fan installation, electric repair services, electric panel upgrades, house rewiring, EV car charger installation, pendant lighting, and more. Call us now for all your lighting services needs!


Powered by LocalWiz.app


Dash Electric - Electrician in Riverside, CA

Request a Call back

Get Your Free Quote Today