Whole House Rewiring in Riverside

Jurupa Ave Riverside, CA, US, 92504


Dash Electric provided prompt and efficient rewiring services to a residence in Riverside, CA. Our electrician assessed the existing electrical system before our team got started on this comprehensive overhaul. We were proud to provide an affordable solution that addressed the homeowner's urgent needs quickly - proving yet again why Dash Electric is one of Southern California’s leading providers for all your residential wiring projects!

After determining what needed to be done, we installed new copper wirings throughout the entire house that was safe for 220V use. This included replacing any old or damaged outlets or switches and adding new ones as necessary. Once all the wiring was installed, our rewiring electrician tested each circuit to ensure that it was functioning properly before moving on to the next step: installing new breaker panels for each section of the house.

These breaker panels are what allow you to control how much power is flowing through your house at any given time. We also installed GFCI outlets throughout the property so that water doesn't flow into areas where it shouldn't while someone is using electricity nearby. The homeowner was very satisfied with our work and he even told us that he will use our service again for future projects.

Benefits of Rewiring Your Home

The electrical wiring in your home is one of the most important systems. It doesn’t matter if you are buying an older home or a new home, you need to make sure that the electrical system is up to code and safe for your family. If there is any doubt whether your wiring needs to be replaced, consider these benefits of updating your system:

Safer Wiring System

Rewiring a house may be the most important thing you can do to improve the safety of your electrical system. A house rewire will reduce fire risk, eliminate the possibility of electrical shock, and make it easier for you to upgrade appliances.

Energy Efficient Wiring System

If you haven't done so already, consider rewiring your home. Rewiring is a great way to make your home more energy efficient and can help cut down on the amount of carbon dioxide (CO2) emitted into the atmosphere.

In addition to saving money, it's also important to consider that if you're thinking about selling your home or buying another one shortly, having an energy-efficient wiring system will be an asset when it comes time to sell or buy.

Updated Panels and Amperage

When you have your house rewired, the electrical panel and wiring are often updated to meet current electrical codes. This is done for several reasons, but most importantly it reduces the risk of fire.

Electrical fires can be caused by a variety of reasons including improper wiring; overloading circuits; loose connections; and faulty equipment. By having your home's electrical system evaluated by an electrician and updated as needed, you can help avoid these situations from occurring at all or reduce their likelihood.

Better Electrical Outlets

You'll have better outlets to power the appliances and devices you use every day. You'll want to make sure that you rewire your home with enough electrical outlets to accommodate all the power-hungry appliances and devices in your home. And while it's true that there are some ways to maximize existing outlets, it's usually not as efficient as adding new ones.

How To Rewire a House

We've gathered together some tips for how to rewire a house so that when you're ready to take on this challenge yourself, you'll be prepared for what's ahead:

Identifying Old Wiring

The first step in rewiring your home is to identify the old wiring. The easiest way to do this is by checking for outlets, switches, and junction boxes that are wired with two-pronged plugs.

Disconnecting From the Grid

To disconnect the power to your house, you first need to turn off the main breaker. If you have an electrician’s panel, there will be a large switch labeled “Main Breaker” or something similar. Turning it clockwise will shut off power to all parts of your home except for those circuits that are still powered by their breakers. Next, turn off the circuit breakers in each room where you need renovations done.

Removing Old Wiring

The next step is to carefully remove all of the wires from their fixtures and switches using needle-nose pliers or lineman's pliers. You may find it helpful to label them with tape as you go so you know which wire goes where later on when wiring everything back up, this way if something goes wrong while you're trying out new circuits, it'll be easier for you later on.

Adding New Wiring

To add new wiring, connect your new circuit wires to the appropriate terminals in the same order they were removed, refer back to your diagram of how everything was connected before you took it apart. This can be tricky since there are many different types of switches and outlets that all work differently.

Reinstalling Fixtures and Outlets

Now It's time to reinstall the light fixtures and outlets. You'll want to check the wiring first: pull out your multimeter, plug it in, and test each wire in turn. If any of them are hot, this indicates that they're live wires and can be reconnected; if none are hot, then all of your wires must be capped off with wire nuts or electrical tape until you can replace them later on.

Next up is testing for power at your circuit breakers. I recommend doing this with an outlet tester, so that if there's no power going into a particular outlet or light fixture then you won't have to worry about cutting yourself on exposed metal when working around those areas.

Next comes checking out what's going on at each outlet: remove its faceplate by unscrewing its screws with a screwdriver, then stick one end of an extension cord into each receptacle slot before flipping its breaker back on. Once done, reassemble everything together again using new screws as needed.

After these steps, it's done! Now that you know how to rewire a house, you can take on this project with confidence. Not only will it save you money, but it will ensure that your home is safe and secure. If you're not confident rewiring your own house, you can always ask a professional for help.

Are You Looking for Riverside Electricians for a House Rewiring?

Dash Electric is a perfect match if you are searching for dependable, unfailing, and responsible Riverside electricians. Our electricians are certified, insured, and bonded. Just let our team know what needs to be done, and we’ll handle the rest. 

We also offer other services like light installation, ceiling fan installation, EV car charger installation, and more. Call us now for all your electrician services needs!


Powered by LocalWiz.app


Dash Electric - Electrician in Riverside, CA

Request a Call back

Get Your Free Quote Today